APGQ Triple-net box

APGQ-FTTH Triple-net box

APGQ-FTTH  outdoor wall mounted optical splitter box is used for wiring connection between optical cable and optical communication equipment. Optical signal is led out through optical fiber jumper through adapter in the distribution box to realize optical wiring function

It is applicable to the FTTH project after the optical cable arrives at the building and is installed in the corridor, basement, machine room and building exterior wall. The optical cable can also be welded and led out with the incoming optical cable after being pulled and coiled by the optical distribution box, so as to realize the direct function of the optical cable and meet the needs of traditional transmission network engineering.

1、 Main features

1. Effectively integrate the three networks of China Mobile, China Unicom and Telecom. The construction space and construction intensity are greatly saved;

2. The box body is made of cold-rolled plate, which is treated by electrostatic spraying, with beautiful appearance, clear lines, good anti-corrosion and waterproof performance and long service life;

3. The optical splitter module adopts drawer modular design, which has strong interchangeability and versatility

4. Adopt the design of left-right structure and upper and lower structure combination structure. There are optical fiber fusion layers on the left and right sides, while the upper layer on the right is the optical splitter wiring layer and the lower layer is the optical fiber fusion layer;

5. Under the condition that the form and thickness of the chassis are consistent, the maximum number of optical fiber fusion discs is 6, which can meet the connection of any form during the construction process;

6 various connector ends are convenient and flexible to install. Used for termination, use and management of optical cables in distribution room and equipment room;

7. The door lock adopts high-quality outdoor waterproof lock, and the box is mounted on the wall;

8. There is a temporary pigtail storage area;

9. Support the management of various optical fiber connectors, such as SC, LC, St, MT-RJ, etc.

Technical parameter

1. Working temperature: - 30 - + 60 ℃, storage temperature - 40 - + 60 ℃

2. Opening angle of box door: 180 °

3. Atmospheric pressure: 70kpa-106kp

4. Photoelectric performance: insertion loss ≤ 0.2db; Additional loss ≤ 0.2b

5. Return loss ≥ 45dB; Additional loss ≤ 5dB

6. Plugging durability life > 1000 times

7. Electrical performance: insulation resistance ≥ 1000m Ω 500V (DC)

8. Electric strength: it can withstand 3000V (DC) / 1min without breakdown / flying fox

3、 Applicability index

1. Nominal working wavelength: 850nm / 1310nm / 1550nm;

2. Optical fiber and optical cable shall comply with GB / t11819 and GB / t7424 specifications;

3. The optical fiber movable connector shall comply with gb12507 and relevant standards and specifications;

4 front operation and installation are quite fast and convenient;

5. The splitter socket board can be turned over, and the butterfly optical cable can be stored, which is convenient for maintenance and multiple maintenance of the optical cable;

6. Two standard plug-in beam splitter installation slots are configured, and two 1:4 / 1:8 plug-in beam splitters can be installed;

7. Product material: cold rolled sheet

8. Product color: normal gray